SATA2 3Gbs Controller Storage Controllers Zone @ Plonter
1
Lycom - ST-131PC
ST-131PC - Use standart computer case and 4 SATA hard drives as a 4Bay Storage system - PCI bracket for PC Case mounting - Multilane SATA port for SATA II Host connection - Supports any type of SATA Device - Supports High Speed Transfer of 1.5Gbps SATA and 3Gbps SATA2 - Type 4x Multilane SATA connector with thumbscrews for Host connection - Fully compliant with SFF 8470 Specification - Cross-Over Pinouts
Lycom - PE-102R5
RAID5 SATA II - 3Gbps External Dual Ports PCI-Express Host (Raid 5, 0, 1,10 and JBOD) - 2Ports 3Gbps SATA II PCI Express 1X host board to support NCQ, Port Multiplier, Raid 5, Raid 10, Raid 0, Raid 1 and JBOD - RAID 0 (Striping), RAID 1 (Mirroring), RAID 0 1 (mirrored-stripping), RAID 5 (Distributed Parity RAID) and JBOD (Just Bunch of Disks) manage multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without the loss of data - Chipset : SiI3132
Lycom - ST-126DA
SATA II 3Gb/s 1-To-5 Port Multiplier bridge board (for 5bay Disk Array) - Install this board inside of your External Disk Array 5bay case and make 5 units of SATA hard drives have one eSATA connection - Can be mounted in standart Centronic 50pin Form factor mounting hole - Chipset : SiI3726
Lycom - ST-125-
Raid 5 SATA II - 3Gbps 4Ports (1External eSATA + 3 Internal) Low Profile PCI Host - RAID 5 (Distributed Parity RAID), JBOD (Just Bunch of Disks), RAID 0 (Striping), RAID 1 (Mirroring) and RAID 0+1 (mirrored-stripping) improve the data performance and provide the data redundancy and rebuilding
Lycom - PE-124R5
PCI-e x8 controller with 4 eSATA 3Gb/s Ports - Supports NCQ, Port Multiplier - Raid 0,1,0+1,5,10,JBOD support - Based on Intel and Silicon Image chipset
